Skip to content

Hot Melt Glue vs Shrink Sleeve Labeling Machine: Which Is Right for a Water Plant?

  • by

Short answer: for round PET water bottles, a hot melt glue (OPP) labeling machine is usually the better choice: the label is wrapped around the bottle and glued at the overlap, so label cost stays low; ServoLines hot melt labelers run from 3,000 up to 48,000 bottles per hour. Choose a shrink sleeve labeling machine when you need full-body 360° decoration, labels on curved or shaped bottles, or a cap seal on 5 gallon bottles; ServoLines shrink sleeve labelers also run from 3,000 up to 48,000 bottles per hour.

How each machine works

Hot melt glue (OPP) labeling: a roll of OPP film label is cut to length, glue is applied at the start and end of the label, and the label is wrapped around the bottle. It suits round bottles of water and soft drinks.

Shrink sleeve labeling: a printed film tube is cut and slid over the bottle (or over the cap), then shrunk with heat so it follows the bottle shape. It can cover the whole bottle or seal the cap.

Side-by-side comparison

Hot melt glue (OPP)Shrink sleeve
Best forRound PET water and soft-drink bottlesShaped bottles, 360° designs, cap seals
Label coverageBody band around the bottleFull body or cap
Label running costLowerHigher (more film per bottle)
Extra equipmentGlue system on the labelerHeat shrink tunnel
ServoLines speeds3,000–48,000 bottles/hour3,000–48,000 bottles/hour

Linear or rotary hot melt labeler?

Linear hot melt labelers are the economical choice for small and medium lines. Rotary hot melt labelers are built for high-speed lines, up to 48,000 bottles per hour. Match the labeler to the output of your filling machine; see how to choose line capacity.

ServoLines labeling machines

ModelTypeOutput (bottles/hour)
SVL-A10Linear hot melt OPP10,000
SVL-A12Linear hot melt OPP12,000
SVL-A15Linear hot melt OPP15,000
SVL-1208S-RRotary hot melt OPP12,000–15,000
SVL-1508S-RRotary hot melt OPP15,000–18,000
SVL-1810S-RRotary hot melt OPP22,000–24,000
SVL-2410S-R (new)Rotary hot melt OPP28,000–30,000
SVL-150Shrink sleeve9,000
SVL-250Shrink sleeve15,000
SVL-300Shrink sleeve (high speed)18,000
SVL-400Shrink sleeve (high speed)24,000
SVL-25Shrink sleeve (double head)30,000
SVL-2410SS (new)Shrink sleeve (high speed)48,000
5 gallon capCap shrink sleeve3,000

See all models in our bottle labeling machines category.

Frequently asked questions

Which labeling machine is best for a new water plant?

For most new water plants with round PET bottles, a linear hot melt OPP labeler is the best value. Move to rotary when your line runs above about 15,000 bottles per hour.

Do I need a shrink sleeve machine for 5 gallon bottles?

Yes, if you want a cap seal sleeve. Our 5 gallon cap shrink sleeve labeling machine runs about 3,000 bottles per hour.

Can one labeler handle different bottle sizes?

Yes, within its range, by changing size parts and adjusting the machine. Tell us all your bottle and label sizes when you request a quote.

Not sure which one fits? Send us your bottle shape, sizes and line speed. Request a quote · Related: What determines the price of a water bottling line?

Leave a Reply

Your email address will not be published. Required fields are marked *